Voltage Selector Switch - YORKVILLE YX Series Owner's Manual

11. Voltage Selector Switch

Select the proper voltage for the geographical region in which the YX10P will be
used. The unit is set for 115V when used with the standard North American line
voltage. For European operation set the unit to 230V. If in doubt of the line voltage
please contact your local Yorkville dealer.
Frequency Response (Hz +/- 3db) 70-20kHz
Crossover Frequency (Hz) 3.5kHz
HF Program Power (Watts)
LF Program Power(Watts)
Power Consumption (typ/max)
Input Sensitivity (Vrms Sine)
Dimensions (DWH xbackW, inches)
Dimensions (DWH xbackW, cm)
Specifications
Model YX10P
System Type Full-Range
Active or Passive Active
Program Power (Watts) 200 Watts
Biamp / Configuration Yes
Max SPL (dB) 119
Driver Configuration 10-inch / 1.4-inch
HF Driver(s) 1.4-inch Aluminum (1-inch throat)
20
HF Dispersion (°H x °V) 90 X40
HF Protection peak limiter
LF Driver(s) 10-inch ceramic
170
LF Impedance(ohms) 4
LF Protection
peak limiter
Shielding no
HF Amplifier Type 30 Watts
LF Amplifier Type 170 watts, Class D bridged
Cooling Scheme passive
Power Cable yes
Power Switch yes, at the back
120/200VA
Inputs - 1/4-inch Jacks 1
Inputs - XLR 1
1.2
Level Controls 2
EQ Controls bass treble
Limiter yes
LED Indicators power, signal, clip
1/8-inch (3.5mm) stereo jack
Other Controls / Features
Enclosure Materials wood
Grill Material Custom Punched Black Perforated Metal
Covering / Finish Black Ozite
12 x 13.5 x 19 x 5.75
30.5 x 34.3 x 48.3 x 14.6
Weight (lbs/kg)
28 /12.7
YX SERIES
3