Table of Contents
Advertisement
...4 INSTALLATION...
4.5 Setting the Input Selector Links – Fig. 4.7
Remove the instrument front panel – see Fig. 4.6, steps 1 to 6.
The positions of the input links is shown in Fig. 4.7 detail A.
4.6 Setting the Isolated Output Link – Fig. 4.7
The positions of the isolated output links is shown in Fig. 4.7 detail B.
Note. The links are factory set and should not be moved from these positions.
24
PL1
Raw pressure
input
A – Input Links
Fig. 4.7 Setting the Input and Output Links
1
Identify Link PL7
2
Set the links for the output
PL7
1
B – Isolated Output Links
PL2
Pasteurized
pressure input
Advertisement
Table of Contents
