Using The Detachable Blower For "Blowing - Craftsman CMXEVBE176060 Instruction Manual

Using the Detachable Blower for
"Blowing"
Two suggested methods of using the Blower are:
1. Fig. T: Insert the Blower Nozzle Round End into the
Detachable Blower Port and turn clockwise to lock.
Fig. T
SP7092-1 12 & 16 GALLON.indb 13
Goggles
Dusk Mask
Detachable
Blower Port
TURN CLOCKWISE
TO LOCK
Blower
Nozzle
2. Fig. U: The Wet/Dry Vac may also be used for
blowing using the seven-foot Hose supplied with the
Wet/Dry Vac. Install the Vac Hose Push Button End in
the Detachable Blower Port.
For added control, an Extension Wand and / or Car
Nozzle can be added to the opposite end of the Hose.
The unit is ready for blowing applications.
Fig. U
3. Fig. V: Turn the Blower "ON" by sliding the Switch in
the Handle of the Blower to the "I" position.
Fig. V
"ON"
Switch
Detachable
Blower Handle
Hose
Car Nozzle
Detachable
Blower Port
"OFF"
13
9/13/19 9:07 AM