How To Use Controller Buttons; How To Use Rechargeable Battery - CeraGem CGM ESA-AD1101 User Manual

4. How to Use Controller Buttons

1. Time Control (5~60 minutes)
1. Press the time button (
time will flicker for 5 seconds.
2. You can change time by pressing plus/minus buttons (
3. The product will be turned off automatically after the selected time.
2. Intensity Control (1~16 levels)
1. Press the intensity button (
intensity level will flicker for 5 seconds.
2. You can change output intensity to 1~16 levels by pressing plus/minus
buttons ( ).
3. Mode Switch (6 modes)
1. Press the mode button (
mode number will flicker for 5 seconds.
2. You can change MODE to 1~6 by pressing plus/minus buttons (
(Pressing MODE button repeatedly also change the mode.)
Mode 1 Cycle mode 2~6
Mode 3 Slow beat
Mode 5 Fast beat 2
6
) once; the product will beep and the current
).
) once; the product will beep and the current
) once; the product will beep and the current
Mode 2 Fast beat
Mode 4 Beat
Mode 6 Massage

5. How to Use Rechargeable Battery

1. Specifications of rechargeable battery
Battery
Operating Voltage : 3.7 V
Recharging Capacity: 1,200 mA
Recharging Voltage : 4.2 V
2. Recharging adaptor
Input Voltage
Output Voltage
Output Current
3. How to recharge
If the power of Slim Belt is insufficient or turned off, recharge it as the
following diagram.
).
- Connect the recharging adaptor to the side of adjustor. The LED lamp of
the recharging adaptor will flicker in red.
- When fully charged, the LED lamp will flicker in green.
[Recharging Time: about 3 hours]
: Li-Ion
: AC100-240 V
: 4.2 V
: 1,000 mA
Recharging Jack
7