Power Fist HVLP User Manual page 14

8870685
19. Store the tool in a dry location.
20. Dispose of waste solvent and paint in accordance with your local
municipal by-laws.
LUBRICATION
NOTICE! Do not use this tool on an air hose that includes an automatic in-
line lubricator. Air tool oil introduced in the gun could mix with the paint,
clog the gun and damage the tool. It will also affect the quality of the
paint.
NOTICE! Never use a penetrating oil to lubricate an air tool. Penetrating
oil acts as a solvent that will dissolve the tool's grease packing and may
damage the o-rings, causing the tool to seize or malfunction.
1. All air tools have an internal coating of grease to prevent corrosion
during shipping and storage. Remove this grease by adding a generous
amount of air tool oil in the air inlet and then run the tool under no load
until the exhaust is clear.
2. Turn the gun upside down and squeeze the trigger. Apply a few drops of
air tool oil to the fluid needle's front bushing. Release the trigger and
apply air tool oil to the fluid needle's rear bushing. Squeeze the trigger
several times to spread the lubricant.
a. An alternative is to coat the fluid needle near the trigger area with
petroleum jelly during the cleaning process. Avoid coating the fluid
needle's point.
3. Clean the gun of excess oil. Excess oil can clog the tool and
compromise the tool's effectiveness at a task.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
14
HVLP Gravity Paint Gun
For technical questions call 1-800-665-8685
V4.0