Table of Contents
Advertisement
FAMILIARISEZ-VOUS AVEC VOTRE ASPIRATEUR
BAGLESS SUPER STICK
Spécifications techniques
Tension :
120V~ 60Hz.
Puissance :
9,8 amps, 1 200 watts
1.
Manche escamotable
2.
Bouton de verrouillage
3.
Pince de retenue du cordon
4.
Boîtier principal
5.
Manche
6.
Commutateur marche/arrêt
7.
Boyau flexible
8.
Couvercle du filtre post-
moteur
9.
Connecteur du boyau
10. Coupelle à poussière
11. Verrou de la coupelle à
poussière
12. Tubes de rallonge (2)
13. Fiche
14. Brosse à plancher
15. Suceur plat
16. Brosse à épousseter
17. Bandoulière
18. Orifices de fixation de la
bandoulière
11
OPERATING INSTRUCTIONS cont.
Attaching the Shoulder Strap
Use the hooks to attach the shoulder
strap to the vacuum cleaner.
Connect the dog leash swivel hooks
to the eyelets located near the top of
the unit handle and at the base of the
unit. Adjust the strap as required for
comfort.
Hook for
Hook for
Shoulder
Shoulder Strap
Strap
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT FILTERS
or for Technical Support
for Model UV130
Call:
(800) 361-4639
(514) 842-8691
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
visit our website: www.euro-pro.com
Please Note:
The Dust Cup Filter is washable. It should, however, be replaced every six
(6) months to ensure peak performance of your vacuum.
Both the Pre-Motor and Post Motor Filters are washable. They should
however be replaced every three (3) months to ensure peak performance of
your vacuum.
Important:
Make sure that ALL filters are completely dry before re-installing back in the
hand vacuum.
Warning:
After extended use, the body
of the vacuum cleaner may become hot.
When using the unit with the shoulder
strap, the unit will touch the body of the
user. Therefore make sure to use the
vacuum cleaner with the strap only when
the unit is cool. If it gets too warm, allow it
to cool before continuing to use it.
Motor Thermostat
Important:
This motor is equipped with
a motor protective thermostat. If for some
reason the vacuum cleaner should
overheat, the thermostat will
automatically turn the unit off. Should
2
this occur, unplug the vacuum cleaner
from the wall outlet and turn off switch.
Remove dust cup and empty. Clean dust
cup filter. Allow the unit to cool for
approximately 1 hour. To restart, re-plug
into wall outlet and turn switch back on.
or
8
Advertisement
Table of Contents
