1 Charging the built-in battery
CHG lamp
• The battery is built in within the camera.
1
Connect the AC Adaptor to the DC IN jack of the camera, making sure the
power is off.
2
Plug the power cord (mains lead) to a wall outlet (wall socket).
The CHG lamp lights on, and charging starts.
When the CHG lamp turns off, charging is finished.
[ Charging time
Full charge time
Approx. 90 min.
• Time required to charge a fully depleted battery at a temperature of 25°C (77°F). Charging may take
longer under certain circumstances or conditions.
• See page 30 for the number of images that can be recorded.
• If you do not operate the camera for a long time, disconnect the AC Adaptor from the DC IN jack of the
camera and from a wall outlet (wall socket).
1
DC IN jack
AC Adaptor
2
Power cord (mains lead)
11