4.
To clean a carpet, press down on the trigger on the handle of the unit, and pull
the unit slowly backwards across the area to be cleaned. Try to use a steady,
gentle back and forth motion.
5.
Repeat this process as many times as necessary until the relevant area of
carpet is cleaned, then move on to a different area, as required.
Tips for Carpet Cleaning:
1.
Grip the carpet cleaner by the carrying handle when lifting it or moving it to
another section of carpet.
2.
Avoid making the carpet too wet, as this could damage the fibres or create
mould or mildew underneath them. Try not to use more than two squirts of
solution for each area of carpet – use mostly dry passes when cleaning.
3.
Always work from back to front while cleaning a carpet, to avoid stepping on
any wet areas.
4.
Allow time for the carpet to dry off after cleaning. Avoid walking on a freshly
cleaned carpet until it is fully clean.
5.
Open a window or use a fan or dehumidifier to help a freshly cleaned carpet
dry out faster and prevent the growth of mould or mildew.
6.
Vacuum the carpet thoroughly after it has dried.
7.
Wipe any cleaning solution residue from woodwork or furniture after cleaning,
to prevent it from damaging or staining these surfaces.
SAFETY INFORMATION FOR THE INCLUDED CARPET CLEANING SOLUTION
•
Only for use with Tower carpet cleaners.
•
Keep out of the reach of children.
•
Causes serious eye irritation.
•
Harmful to aquatic life with long lasting effects.
•
Avoid release to the environment.
•
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. If eye irritation persists:
Get medical advice.
•
Dispose of container in accordance with national regulations.
10
Need help?
Do you have a question about the TCW10 and is the answer not in the manual?