Do you have a question about the VL100 OPTIMUM and is the answer not in the manual?
Questions and answers
Lin
March 3, 2025
Where is the filter release button
1 comments:
Mr. Anderson
May 14, 2025
The filter release button on the Tower Hobbies VL100 OPTIMUM is located on the dust tank. Press it to open the filter housing.
This answer is automatically generated
Derek
March 1, 2025
What is the motor size on the cliff optimum 100
1 comments:
derek
March 1, 2025
@Derek , should be VL100 Optimum!
Rajendra Bhogaita
February 26, 2025
battery does charge
1 comments:
Mr. Anderson
February 26, 2025
The Tower Hobbies VL100 OPTIMUM battery charges properly when the unit is connected to the mains using the included adapter. The adapter’s jack must be connected to the unit’s charging port, and the other end must be plugged into an active mains socket with the switch turned ON. The battery indicator on the control panel will illuminate and begin to flash, confirming that charging is in progress.
This answer is automatically generated
Theresa Norris
July 10, 2025
Power cuts out when brush attachment is used.
Carole Smith
June 22, 2025
Keeps switching off and there is a red squiggle on the front with a cross on it. Everything has been cleared. No blockages and it's fully charged
TABLE OF CONTENTS THIS BOX CONTAINS SPECIFICATIONS IMPORTANT SAFETY INFORMATION • Key safety points • General safety • Whilst using the vacuum • Plug and cord • Power adapters STRUCTURE OF YOUR APPLIANCE • Features & functions BEFORE FIRST USE •...
THIS BOX CONTAINS Instruction manual 3-in-1 vacuum cleaner Battery pack AC adaptor Filter 2 in 1 Brush and Crevice Tool Wall mounting kit Vacuum stand SPECIFICATIONS RATED VOLTAGE AC 100 - 240V~ FREQUENCY 50/60Hz POWER CONSUMPTION 120W CHARGING TIME 4 - 5 Hours RUN TIME 30 - 60 Minutes DIMENSIONS (CM)
IMPORTANT SAFETY INFORMATION Please read these safety notes carefully • Cleaning and user maintenance should BEFORE using your Tower appliance. not be undertaken by children without supervision. These warnings have been provided in the interest of safety. Basic safety precautions •...
WHILST USING THE VACUUM POWER ADAPTERS • Not suitable for carpets with long fibres WARNING! NEVER attempt to open any as the bristles will damage the fibres. part of the power adapter or plug as you risk getting an electric shock. •...
BEFORE FIRST USE SETTING UP TURNING THE APPLIANCE ON/OFF AND SPEED SELECTION 1. Remove your appliance from the packaging. 1. Once the appliance is fully charged, press the On/Off/Speed Selection 2. Check that there is no visible damage to button located on the handle to turn the the body.
USING THE ACCESSORIES STAND ASSEMBLY This vacuum cleaner comes with a 2 in This unit comes equipped with a stand for 1 Brush and Crevice tool and a Crevice easy storage. Nozzle for vacuuming corners and cleaning 1. Insert the metal tube to the stand base delicate surfaces.
CLEANING AND CARE EMPTYING THE DUST TANK CLEANING THE ANTI TANGLE BRUSH BAR Hold the unit over a bin and press the dust tank quick release button. Empty the 1. Unscrew the brush bar cap on the side contents of the dust tank. Once empty, of the floorhead.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Ensure the vacuum cleaner is The battery is low. fully charged. Check that there are no The vacuum will not Blockage to the dust tank blockages to the dust tank work. or filter. or filter and remove as necessary.
DISPOSAL OF THE UNIT Appliances bearing the symbol shown The WEEE directive, introduced in August here may not be disposed of in domestic 2006, states that all electrical items must rubbish. You are required to dispose of old be recycled, rather than taken to landfill. electrical and electronic appliances like Please arrange to take this appliance to this separately.
Page 12
We hope you enjoy your appliance for many years... This product is guaranteed for 12 months 28 days of purchase. If you do not register from the date of original purchase. the product with us within the 28 day period, your product is guaranteed for If any defect arises due to faulty 1 year only.
Need help?
Do you have a question about the VL100 OPTIMUM and is the answer not in the manual?
Questions and answers
Where is the filter release button
The filter release button on the Tower Hobbies VL100 OPTIMUM is located on the dust tank. Press it to open the filter housing.
This answer is automatically generated
What is the motor size on the cliff optimum 100
@Derek , should be VL100 Optimum!
battery does charge
The Tower Hobbies VL100 OPTIMUM battery charges properly when the unit is connected to the mains using the included adapter. The adapter’s jack must be connected to the unit’s charging port, and the other end must be plugged into an active mains socket with the switch turned ON. The battery indicator on the control panel will illuminate and begin to flash, confirming that charging is in progress.
This answer is automatically generated
Power cuts out when brush attachment is used.
Keeps switching off and there is a red squiggle on the front with a cross on it. Everything has been cleared. No blockages and it's fully charged
The top says e6 and won't charge