Table of Contents
Advertisement
1YSA160045-EN - Rev. 5
D.5.
LED feature for wiAutoLink
The wiAutoLink has the added feature of indicating the full operational status of the device once it is fully charged by blinking
once the LED in the transformer housing. The blinking LED will happen within 90 seconds of closing the medium voltage line.
In order to give information related to the MV current status condition, a dedicate firmware on request, allow to perform blinking led every
10s. To guarantee safe condition and avoid misunderstanding, a dedicated label/stickers on body of apparatus identify this feature.
Section E: Maintenance
Test the correct operation of electronic sectionalizer on a regular basis, preferably, while maintenance on upstream recloser is made:
Figure 41.
Figure 42.
31 / 33
Advertisement
Table of Contents
