Ortur -4 Operation Manual
  1. Manuals
  2. Brands
  3. Ortur Manuals
  4. 3D Printers
  5. Ortur-4
  6. Operation manual

Ortur -4 Operation Manual

Hide thumbs Also See for Ortur-4:
Table of Contents

Advertisement

Quick Links

Download this manual
Dongguan Ortur Intelligent Technologies Co., Ltd.
www.ortur3d.com www.ortur3dprinter.com
Operation Manual of Ortur-4
1. "Print from SD" Menu:-----------------------------------------------------------------------------------------------------------------3
2. "Motion" Menu:-------------------------------------------------------------------------------------------------------------------------4
2.1 "Move axis" Menu: -------------------------------------------------------------------------------------------------------------------4
2.1.1 "Soft Endstops" Option:-----------------------------------------------------------------------------------------------------------4
2.1.2 "Move X" Menu:---------------------------------------------------------------------------------------------------------------------5
2.2 "Auto home" Command:-----------------------------------------------------------------------------------------------------------5
2.3 "Home X" Command:----------------------------------------------------------------------------------------------------------------6
2.4 "Home Y" Command:----------------------------------------------------------------------------------------------------------------6
2.5 "Home Z" Command:----------------------------------------------------------------------------------------------------------------6
2.6 "Bed Leveling" Menu:---------------------------------------------------------------------------------------------------------------6
2.6.1 "Auto Home" Command:----------------------------------------------------------------------------------------------------------7
2.6.2 "Level bed" Command:-----------------------------------------------------------------------------------------------------------7
2.6.3 "Edit Mesh" Menu:-----------------------------------------------------------------------------------------------------------------7
2.6.4 "Bed Leveling" Option:-----------------------------------------------------------------------------------------------------------8
2.6.5 "Fade Height" Menu:--------------------------------------------------------------------------------------------------------------8
2.6.6 "Probe Z Offset" Menu:-----------------------------------------------------------------------------------------------------------8
2.6.7 "Load setting" Command:-------------------------------------------------------------------------------------------------------9
2.6.8 "Store setting" Command:------------------------------------------------------------------------------------------------------9
2.7 "Disable Steppers" Command:---------------------------------------------------------------------------------------------------9
3. "Temperature" Menu:---------------------------------------------------------------------------------------------------------------10
3.1 "Nozzle" Menu:-----------------------------------------------------------------------------------------------------------------------10
3.2 "Bed" Menu:--------------------------------------------------------------------------------------------------------------------------10
3.3 "Fan speed" Menu:------------------------------------------------------------------------------------------------------------------11
3.4 "Preheat PLA" Menu:---------------------------------------------------------------------------------------------------------------11
3.4.1 "Preheat PLA" Command:-------------------------------------------------------------------------------------------------------12
3.4.2 "Preheat PLA End" Command:-------------------------------------------------------------------------------------------------12
3.4.3 "Preheat PLA Bed" Command:------------------------------------------------------------------------------------------------12
3.5 "Preheat ABS" Menu:--------------------------------------------------------------------------------------------------------------13
4. "Configuration" Menu:--------------------------------------------------------------------------------------------------------------13
4.1 "Advanced Settings" Menu:------------------------------------------------------------------------------------------------------13
4.1.1 "Probe Z Offset" Menu:-----------------------------------------------------------------------------------------------------------14
4.1.2 "Set home offsets" Command:------------------------------------------------------------------------------------------------14
1
No.27, Second Industrial Park, Heshi Road, Qiaotou Town, Dongguan 523527, Guandong Province, China

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ortur-4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ortur Ortur-4

Summary of Contents for Ortur Ortur-4

  • Page 1: Table Of Contents

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com Operation Manual of Ortur-4 Phase 1: The Operation Menu Before Printing: 1. “Print from SD” Menu:-----------------------------------------------------------------------------------------------------------------3 2. “Motion” Menu:-------------------------------------------------------------------------------------------------------------------------4 2.1 “Move axis” Menu: -------------------------------------------------------------------------------------------------------------------4 2.1.1 “Soft Endstops” Option:-----------------------------------------------------------------------------------------------------------4 2.1.2 “Move X” Menu:---------------------------------------------------------------------------------------------------------------------5 2.1.3 “Move Y”...
  • Page 2 Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 4.1.3 “Velocity” Menu:------------------------------------------------------------------------------------------------------------------14 4.1.4 “Acceleration” Menu:------------------------------------------------------------------------------------------------------------14 4.1.5 “Jerk” Menu:------------------------------------------------------------------------------------------------------------------------15 4.1.6 “Steps/mm” Menu:---------------------------------------------------------------------------------------------------------------15 4.1.7 “Temperature” Menu:------------------------------------------------------------------------------------------------------------15 4.1.8 “Filament” Menu:-----------------------------------------------------------------------------------------------------------------15 4.1.9 “Initialize EEPROM” Menu:------------------------------------------------------------------------------------------------------16 4.2 “Runout Sensor” Option:----------------------------------------------------------------------------------------------------------16 4.3 “Outage Recovery” Option:------------------------------------------------------------------------------------------------------16 4.4 “Preheat PLA configuration” Menu:--------------------------------------------------------------------------------------------17 4.5 “Preheat ABS Configuration”...

  • Page 3: Phase 1: The Operation Menu Before Printing

    Info Screen: When Ortur-4 3D Printer is working, You would see this Info Screen. And when you press the Control Button, you could go to the Main Menu to operate this printer. Phase 1: The Operation Menu Before Printing: 1.

  • Page 4: Motion" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com In the “Print from SD” Menu, you would find the Gcode files, you had saved in the SD card. Please turn clockwise or anticlockwise the Control Button to choose the Gcode file, you’d like to print. And then, press the Control Button to start the print.

  • Page 5: Move X" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 2.1.2 “Move X” Menu: In the “Move axis” Menu, the Second option is “Move X” Menu, You could press the Control Button to go to this menu. And then, you could choose the “Move 10mm”, “Move 1mm” and “Move 0.1mm” Commands.

  • Page 6: Home X" Command

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 2.3 “Home X” Command: In the “Motion” Menu, the Third Option is the “Home X” Command, You could press the Control Button to only let the X Axis go back Home (X:0).

  • Page 7: Auto Home" Command

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 2.6.1 “Auto Home” Command: Before you activate the Auto Bed Leveling Function, You need to press the Control Button to do the “Auto home” firstly. 2.6.2 “Level bed” Command: In the “Bed Leveling” Menu, the Second Option is “Level Bed” Command. You could press the Control Button to let the sensor probe the Levelness of the Hotbed.

  • Page 8: Bed Leveling" Option

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 2.6.4 “Bed Leveling” Option: In the “Bed Leveling” Menu, the Fourth Option is “Bed Leveling” Option, You could press the Control Button to turn on or turn off the “Bed Leveling” Function .

  • Page 9: Load Setting" Command

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com PS. Please MUST take a look at the Manual of “How to set up the Auto-Leveling & Probe Z Offset Function”, So that you could get know how to set up this Z Offset Value, it’s very important, otherwise, you may damage the printer by wrong operation! 2.6.7 “Load setting”...

  • Page 10: Temperature" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 3. “Temperature” Menu: In the Main Menu, the Third Submenu is “Temperature” Menu. You could press the Control Button to go to this menu. 3.1 “Nozzle” Menu: In the “Temperature” Menu, the First Option is “Nozzle” Menu. You could press the Control Button to go to “Nozzle”...

  • Page 11: Fan Speed" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com And then, you could turn clockwise or anticlockwise to adjust the Target Temperature of Hotbed. And press the Control Button to preheat the Hotbed to this Temperature. 3.3 “Fan speed” Menu: In the “Temperature” Menu, the Third Option is “Fan speed” Menu. You could press the Control Button to go to this menu.

  • Page 12: Preheat Pla" Command

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 3.4.1 “Preheat PLA” Command: In the “Preheat PLA” Menu, the First Option is “Preheat PLA” Command. You could press this command, and it would preheat both of Nozzle and Hotbed to the target temp for PLA filament.

  • Page 13: Preheat Abs" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 3.5 “Preheat ABS” Menu: In the “Temperature” Menu, the Fifth Option is “Preheat ABS” Menu. If the filament is ABS, you could go to this Menu to use these commands to preheat the ABS filament directly.

  • Page 14: Probe Z Offset" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 4.1.1 “Probe Z Offset” Menu: It’s same one as 2.6.6 “Probe Z Offset” Menu. PS. Please MUST take a look at the manual of “How to set up the Auto-Leveling & Probe Z Offset Function”, So that you could get know how to set up this Z Offset Value, it’s very important!

  • Page 15: Jerk" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 4.1.5 “Jerk” Menu: PS. For the normal users, please don’t change any configuration in this menu. 4.1.6 “Steps/mm” Menu: PS. For the normal users, please don’t change any configuration in this menu.

  • Page 16: Initialize Eeprom" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 4.1.9 “Initialize EEPROM” Menu: In the “Advanced Settings” Menu, the Ninth Option is “Initialize EEPROM” Menu. You could press the Control Button to go to “Initialize EEPROM” Menu. And there is a “Initialize EEPROM”...

  • Page 17: Preheat Pla Configuration" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com In the “Configuration” Menu, the Third Option is “Outage Recovery” Option. You could press the Control Button to turn on or turn off the Power Outage Recovery&Resume Print Function. 4.4 “Preheat PLA configuration” Menu: In the “Configuration”...

  • Page 18: Store Setting" Command

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 4.6 “Store setting” Command: In the “Configuration” Menu, the Sixth Option is “Store setting” Command. You could press the Control Button to store your manual setting. 4.7 “Load setting” Command: In the “Configuration” Menu, the Seventh Option is “Load setting” Command. You could press the Control Button to load the the setting, that you had stored at last time.

  • Page 19: Preheat Pla" Command

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 5.1 “Preheat PLA” Command: In the “Change filament” Menu, the First Option is “Preheat PLA” Command. Press the Control Button to change a roll of new PLA Filament step by step: 5.1.1 First Step: The Extruder Head would Home All.
  • Page 20 Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 5.1.4 Fourth Step: You need insert the new PLA Filament from the Filament Detection Sensor, through the Exturder and Filament Tube, till the Extruder Head. 5.1.5 Fifth Step: Waiting for the Nozzle heating up to the Target Temperature of PLA.

  • Page 21: Preheat Abs" Command

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com If you want to purge more filament, you could choose the “Purge more” Command. If you choose the “Continue” Command, the printer would resume the printing. 5.1.9 Ninth Step: Waiting for print to resume.

  • Page 22: Phase 2: The Operation Menu During Printing

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com Then, please press the Control Button, and on the next steps, it would be the Same Operation as {“Preheat PLA” Command}. Phase 2: The Operation Menu During Printing: 6. “Pause print” Command: In the Main Menu, the First Option is “Pause print”...

  • Page 23: Tune" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com 8. “Tune” Menu: In the Main Menu, the Third Option is “Tune” Menu. You could press the Control Button to go to this menu. 8.1 “Speed” Menu: In the “Tune” Menu, the First Option is “Speed” Menu. You could press the Control Button to go to this menu.

  • Page 24: Bed" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com And turn clockwise or anticlockwise the Control Button to turn the Nozzle Temperature up and lower by Celsius degree. 8.3 “Bed” Menu: In the “Tune” Menu, the Third Option is “Bed” Menu. You could press the Control Button to go to this menu.

  • Page 25: Flow" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com And turn clockwise or anticlockwise the Control Button to turn the Fan Speed up and lower. 8.5 “Flow” Menu: In the “Tune” Menu, the Fifth Option is “Flow” Menu. You could press the Control Button to go to this menu.

  • Page 26: Babystep Y" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com And turn clockwise or anticlockwise the Control Button to adjust the X Value a little bit. 8.7 “Babystep Y” Menu: In the “Tune” Menu, the Seventh Option is “Babystep Y” Menu. You could press the Control Button to go to this menu.

  • Page 27: Configuration" Menu

    Dongguan Ortur Intelligent Technologies Co., Ltd. www.ortur3d.com www.ortur3dprinter.com And turn clockwise or anticlockwise the Control Button to adjust the Z Value a little bit. 9. “Configuration” Menu: In the Main Menu, the Fourth Option is “Configuration” Menu. You could press the Control Button to go to this menu.

Table of Contents