Log Into The Web Interface; Begin Commissioning - Inner Range inception Quick Start Manual

4

Log into the web interface

• Once connected, you will be
presented with a login screen
• The default Installer
credentials are:
Username: installer
Password: installer
PIN: 01
5

Begin commissioning

• You have successfully connected
to your Inception Controller
• To commission the system, it is
recommended that you use the
Commissioning Checklist, which will
guide you through the entire
process from start to finish
For more information, visit www.innerrange.com/inception.
There you will find installation guides and videos to help you
get the most out of your Inception System.
Inception, SkyTunnel and SIFER are registered trademarks of Inner Range Pty Ltd.
Product specifications subject to change without notice. Pictures shown may vary from actual product.
© 2016 Inner Range Pty Ltd all rights reserved.
Part Number: 636300QS February 2016