Wired (Ethernet) Connection; Lcd Terminal; Inception Connect Utility - Inner Range inception Quick Start Manual
Hide thumbs
Also See for inception:
- Installation manual (24 pages) ,
- Quick start manual (4 pages) ,
- Quick start manual
Table of Contents
Advertisement
Wired (Ethernet) connection
Direct Connection
•
Once connected, the ETHERNET LED will turn on
•
To connect to the Inception web interface, the Inception's IP address
is required. There are two different ways to find it the IP address:
LCD Terminal
•
If using an LCD Terminal (available separately, see the
installation manual for information on connecting the terminal
to the Inception Controller), log on by pressing [0] [1] [OK]
The IP address can be viewed by pressing [MENU] [5] [2] to
reach the Network Settings section, then [V] to view the
address
•
Open a browser and navigate to the IP address
Inception Connect Utility
•
Install the Connect Utility onto your computer. A copy of the
installer is included on the USB stick inside the Inception box
•
Run the Utility. It will automatically attempt to detect Inception
devices on the local network
•
Select your Inception from the list and press "Open In Browser"
or
Local Network
Advertisement
Table of Contents
Need help?
Do you have a question about the inception and is the answer not in the manual?
Questions and answers