Surround Outputs - B&K Reference 30 Owner's Manual

SURROUND OUTPUTS

Your processor has multiple surround outputs for use with external amplifier(s) or powered speakers. The
Reference 30 processor allows THX Surround EX compatibility via it's two Surround Back 'S BACK' processor
outputs.
Here is a typical processor surround output setup
Connect to the Subwoofer 'SW'
power amplifier input
Connect to the Surround Left
'Sl' power amplifier input
Connect to the Surround Right
'Sr' power amplifier input
Connect to the Surround Back Left
'Sbl' power amplifier input
Connect to the Surround Back Right
'Sbr' power amplifier input
Subwoofer Output - Connect an RCA cable from the processor's SW output (part of the surround outputs). If
your subwoofer does not contain its own amplifier you will need to purchase an external B&K or other power
amplifier. Connect the processor's SW output to the audio input of the external amplifier. Connect the external
amplifier's speaker output to your subwoofer.
:
Z A A U D I O O U T
S U B C E N T E R
S U R R F R O N T
S B A C K
17
Connect to the Center power
amplifier input
Connect to the Left Front
power amplifier input
Connect to the Right Front
power amplifier input
Connect to Zone 1 (A)
composite video monitor input
p/n 12857 Rev. 0717A