Surround Outputs - B&K Reference 31 Owner's Manual

SURROUND OUTPUTS

Your Processor has multiple surround processor outputs for use with external amplifier(s) or powered speakers.
The Reference 31 processor allows THX Surround EX compatibility via two Surround Back 'S BACK' processor
outputs.
Here is a typical surround output setup
Connect to the Subwoofer 'SW'
power amplifier input
Connect to the Surround Left
'Sl' power amplifier input
Connect to the Surround Right
'Sr' power amplifier input
Connect to the Surround Back Left
'Sbl' power amplifier input
Connect to the Surround Back Right
'Sbr' power amplifier input
Subwoofer Output - Connect an RCA cable from the Processor's SW output (part of the surround outputs. If
your subwoofer does not contain its own amplifier (powered subwoofer) you will need to acquire the use of an
external power amplifier. Connect the external amplifier's speaker output to your subwoofer.
:
ZA AUDIO OUT
SUB CENTER
SURR FRONT
S BACK
16
Connect to the Center power
amplifier input
Connect to the Left Front
power amplifier input
Connect to the Right Front
power amplifier input
Connect to Zone 1 (A)
composite video monitor input