B&K Reference 30 Owner's Manual page 45

Set input source name - From the factory, your processor will display source names that match those printed on
the rear of the processor and on the supplied remote. However, your processor allows you to change the
displayed names to match the actual sources used. If you do not want to change the names then skip this step.
Note that the tuner name cannot be changed.
SETUP DVD
1 Favorite Mode
2 Favorite Speakers
3 Level
4 Name
4 Name
5 Component Video
6 DVD Audio Input
next item
From Remote
­ V
8
(PAUSE) or (STOP)
9 SEL or ENTER
ˆ ‡
10
(REW) or (FF)
­ V
11
(PAUSE) or (STOP)
ˆ ‡
12
(REW) or (FF)
13 repeat 10 - 12
14 SEL or ENTER
Set component video - Allows you to associate one of two component video inputs with each of your input
sources. When you choose that source for viewing, the associated component video input will be routed to the
component video output.
From Remote
­ V
15
(PAUSE) or (STOP)
ˆ ‡
16
(REW) or (FF)
INPUT
Surround
7
0.0 dB
DVD
DVD
2
No
adjust
MENU setup system
From Front Panel
(UP) or (DOWN)
(ENTER)
VOLUME KNOB
(UP) or (DOWN)
VOLUME KNOB
repeat 10 - 12
(ENTER)
SETUP DVD
1 Favorite Mode
2 Favorite Speakers
3 Level
4 Name
5 Component Video
5 Component Video
6 DVD Audio Input
next item
MENU setup system
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
SETUP DVD
1 Favorite Mode
2 Favorite Speakers
3 Level
4 Name
4 Name
5 Component Video
6 DVD Audio Input
SEL save name
character
MENU setup system
Action
move to Name
activate NAME editing
move to character position
change blinking character
move to new character position
continue changing characters
deactivate NAME editing
INPUT
Surround
7
0.0 dB
DVD
2
2
No
adjust
Action
move to Component Video
select 1 or 2 for use with source
42
INPUT
Surround
7
0.0 dB
DVD1
DVD
2
No
position
p/n 12857 Rev. 0717A