Siemens SIMEAS-Hub 7KE6000-8AD /CC Operating Instructions Manual page 44

English
Safety
according IEC/EN 61010, part 1
(VDE 0411 part 1)
Overvoltage category
Pollution degree
Fire resistance class of housing
Voltage test (type test)
10Base-T Ports vs. power supply
Impulse voltage according to IEC 60255-5 (type test)
Voltage test (routine test)
10Base-T Ports vs. power supply
Protection class
for the device
for persons
Warning
The SIMEAS-Hub is a build-in device and must therefore be installed on
a switchboard or in a control cabinet. After installation, it is important
that all terminals are properly covered to prevent accidental contact with
energized parts.
Isolation of inputs and outputs
Power supply vs. 10Base-T Ports
Electromagnetic compatibility
Emitted interference according to IEC/EN 61000-6-4
Interference field strength according to EN 55011/CISPR11 Class A
Radio interference voltage according to EN 55011/CISPR11 Class A
Immunity to interference according to IEC/EN 61000-6-2
Interference immunity to electromagnetic fields
according to IEC/EN 61000-4-3
Static electricity discharge
according to IEC/EN 61000-4-2
Fast transients/burst
according to IEC/EN 61000-4-4
Line conducted HF according to IEC/EN 61000-4-6
Impulse voltage/surge according to IEC/EN 61000-4-5
44
SIMEAS-Hub
III
2
V0 according to UL94
U = 5.2 kV DC / 1 min
5 kV
U = 3.1 kV DC / 2 s
IP 40
IP 2x
double or reinforced
10 V/m
8 kV
2 kV
10 V
1/2 kV
E50417-K1074-C299-A1