Linux Version Utility - Vecow DVC-1000 User Manual

4.2 Linux Version Utility

If you want to run Intel realsense-viewer, you need to install SDK first.
It is an open source and available on https://github.com/IntelRealSense/
librealsense You can choose to install online or manually.
4.2.1 Advance Configuration
Functions are the same as Window version include
• Searching Camera IP Address
• Change IP Address
• Edit password
• Restore factory
• Camera Firmware Update
• System Firmware Update
• System Firmware Recovery
• Shut down
• Restart
4.2.2 Accessing Web Interface
Step 1 Before you access the camera image, make sure the SDK has been
installed successfully. Start Terminal and type the following command to
open the intel realsense-viewer, the "Intel Realsense-Viewer" will pop up.
Command : Realsense-viewer
©Vecow DVC-1000 User Manual DVC-1000 Utility 27