Vecow DVC-1000 User Manual page 24

4.1.7 System Firmware Recovery
If your system files are damaged, you can recover your system through "System FW
recovery". The recovery process takes approximately 30 minutes depending on your
network condition. While recovery firmware, make sure the power supply is constant
throughout the process. The recovery process is an advanced configuration, failure
to comply to the instruction below may cause the camera to become unusable. In
that case, send your camera back to VECOW for customer service.
Step 1 Open the VECOW utility, right click your device and select "System FW
Recovery".
Step 2 Select "Recovery".
©Vecow DVC-1000 User Manual DVC-1000 Utility 19