Vecow DVC-1000 User Manual page 21

Step 5 Make sure the camera FW update successful.
Step 6 Select "Yes" to restart the system, open VECOW utility, search device,
confirm that the camera FW has been updated to the latest version.
4.1.6 System Firmware Update
The DVC-1000 system firmware can be updated manually when new FW releases
The updating process takes approximately 30 minutes depending on your network
condition. While updating firmware, make sure the power supply is constant
throughout the process. The updating process is an advanced configuration, failure
to comply to the instruction below may cause the camera to become unusable. In
that case, send your camera back to VECOW for customer service.
Step 1 Copy the files that need to be updated to any folder on your computer first.
Step 2 Open the VECOW utility and select "System FW Update".
©Vecow DVC-1000 User Manual DVC-1000 Utility 16