Vecow DVC-1000 User Manual page 29

4.1.10 Accessing Web Interface
You can access your DVC-1000 camera from its own web interface.
Note that the web interface only supports Microsoft Internet Explorer 10.0 or above.
Step 1 Start your web browser. In the Search Bar, type in "http://your IP
address:8888/" of your DVC-1000 camera.
Step 2 Entering from the webpage has the same function as VECOW utility.
4.1.11 Accessing Camera Image
Step 1 Before you access the camera image, make sure the SDK has been
installed successfully. Start Terminal and type the following command to
open the Intel Realsense-viewer, the "Intel Realsense-Viewer" will pop up.
Command : Realsense-viewer
©Vecow DVC-1000 User Manual DVC-1000 Utility 24