Data Editing - Delta DFS150-485 User Manual

Data Editing

Prefix and Suffix characters are data characters that can be sent before and after decoded data.
This setting is for all symbologies.
The maximum size of a prefix or suffix configuration is 10 characters.
All modification of prefix and suffix will overwrite the previous one. User must set the prefix or
suffix from a fixed address so that it cannot be revised a character at specified address
individually.
Table 27. Barcode prefix (0x1B58)
Bits Default Value
N/A
6:0
(No Prefix)
Table 28. Barcode suffix (0x1C58)
Bits Default Value
N/A
6:0
(No Suffix)
DFS150-485 2D Fixed Scanner User Guide
Access
Determine the hex value from ASCII table.
Valid range: 0x20-0x7F
R/W If you want to remove the prefix of barcode, set the value to
0.
To add blackslash(\), set the value to 5C twice.
Access
Determine the hex value from ASCII table.
Valid range: 0x20-0x7F
R/W If you want to remove the prefix of barcode, set the value to
0.
To add blackslash(\), set the value to 5C twice.
Description
Description
Appendix
A-7