Delta DFS150-485 User Manual page 24

Appendix
Table 24. Manual mode centering windows - Bottom boundary (0x1141)
Bits Default Value
6:0 60
Table 25. Scanner LED - Illumination light (0x132C)
Bits Default Value
0 1
Table 26. Reverse barcode (0x1855)
Bits Default Value
0:1
0
A-6
Access
R/W The bottom boundary (from 0-100) of centering window.
Access
If you want the illumination lights on while reading a bar
code, set the value to 1. However, if you want to turn off the
R/W lights, set the value to 0.
This setting does not affect the aimer light.
0: Off; 1: On
Access
Reverse barcode is used to allow the scan engine to read
bar codes that are inverted.
Valid value:
0: Reverse barcode off
R/W 1: Reverse barcode only, read only inverted barcodes
2: Reverse barcode and standard barcodes
Images capture function with the address 0x8900 from the
scanner are not reversed. This is a setting for decoding
only.
Description
Description
Description
DFS150-485 2D Fixed Scanner User Guide