Gauss-/Teslameter
FH 52
3.3.6 Main Menu
The following menus can be invoked from the main menu:
Fig. 3: Main menu
3.3.7 AC/DC Menu
In the AC/DC menu you can choose whether you want to measure static (DC) magnetic fields or
periodically alternating (AC) fields. Make your choice using the arrow keys and finish the input
Enter
Mode
with the
or the
key.
Fig. 4: AC/DC menu
If AC is selected, the root mean square (RMS) value of the field strength or flux density of a
periodically alternating magnetic field is displayed.
If DC is selected, the measured value for a static magnetic field is shown. The sign gives the
field direction according to the definition in chapter 3.7.2. Additionally the polarity can be
shown with the characters N (for North) and S (for South), see chapter 3.3.14.
3.3.8 Unit Menu
The FH 52 shows the magnetic flux density or induction B in Tesla (T) or Gauss (G) or the
magnetic field strength H in Kiloampere per Meter (kA/m), Ampere per Centimeter (A/cm) or
Oersted (Oe).
BA - Nr.: 1620010102
Page 18