Axis Camera Station Quick Installation Manual page 15

3. Next, under Views, define the camera views as seen from the
main AXIS Camera Station user interface.
3.1 Select view according
to the number of
cameras you want to
configure.
Example:
To configure 4
cameras, select
To configure 9
cameras, select
4. Under General, make sure that the IP address of the local
dedicated computer is entered in the Server IP address field.
5. If you have cameras outside your local network and a proxy
server is used for external network access, refer to the User's
Manual for how to configure the proxy settings,
You have now performed the minimum required setup in the Administration
pages. For instructions on configuring recordings, alarms, motion detection,
scheduling, etc., see the User's Manual.
6. From the AXIS Camera Station interface, select a
camera view by clicking one of the View Selection
buttons:
7. The camera will now appear in the main window,
where live images from the cameras are shown.
3.2 Select camera position
3.4 Repeat 3.2 and 3.3 for all cameras.
3.5 Click OK to save and exit.
15
3.3 Select camera