Axis Camera Station Quick Installation Manual page 14

2. From the Cameras tab, fill in this information:
2.1 Select camera
to configure.
2.2 Camera
enabled checkbox
must be checked.
2.3 Name the
camera.
2.4
Enter camera's
Local IP address
(LAN) or host
name.
2.8 Open the camera's web page to set properties by clicking Link to Camera.
2.9 Check connection to camera by clicking Test Image.
2.10 Click Apply.
Notes:
• Click the "?" button to identify the Axis camera/video server model.
In the Camera Type field, specify the connected Axis video server if using an
•
analog CCTV camera.
• The WAN must be specified if a client or web interface client is run from
another network than AXIS Camera Station. If no WAN address is available,
enter the LAN address.
14
2.5 Click "?" to get
the correct
camera or video
server type.
2.6 For video
servers, specify
video port
number in
Camera port
number field.
2.7 Enter camera's
User and password
default user = root
default pass = pass