4.4. Screw the top rails (d) onto the front and back.
4.5. Secure the back panels (J) using 8 screws, 4 in each corner.
fig.5
4.6.
4.7. Turn the workbench upside down and screw in the corner braces (o) as shown in the diagram. At each corner attach the leg levellers (T). Slide the
workbench top (P) under the main unit and fix with 4 hex head screws (U)
4.8. Attach the inner slides onto the drawers. Slot the horizontal tab into the hole in the drawer and the vertical tab into the other hole. Push down until the