Advertisement
4. asseMbly
4.1. As shown in the diagram assemble the two
large side panels (A), bottom rail (C) and
centre support (e).
fig.3
4.2. Attach the outer slide to the corresponding left/right side panel (G, H). Insert the tabs into the holes in the side panel making sure that
the slider stop fits into the small hole.
4.3. Attach the side panels (G ,H) onto the main unit by screwing them to the front centre support (e) and side panels. Attach support
panels (I) to the side of the unit without sliders.
© Jack Sealey limited
fig.2
Original Language Version
AP2030BB Issue 2 (HF) 26/06/18
Advertisement
