Figure 30. Remove the upper case (with keyboard)
Attention: Do not pull up the upper case before detaching the antenna cable connectors and LCD
cable connector. Otherwise the cables may be damaged.
Disassemble the LCD module
The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case. Refer to "Remove the
upper case (with keyboard)" on page 46 for instructions.
Remove the LCD panel
Step 1.
Remove the screw rubbers.
Figure 31. Remove the screw rubbers
Step 2.
Remove 2 screws.
48
Lenovo 300e 2nd Gen Hardware Maintenance Manual