Improving Sound By Switching Channels - Oricom TV7400 User Manual

Improving Sound by Switching Channels

Note: Make sure the battery is fully charged before first use. Charge
the battery for about 3 hours before first use.
RF Transmission of the Transmitter will automatically switch OFF in
approximately 5 minutes if there is no Audio Signal, or the Signal that
it receives from the Audio Source is too weak for proper reception.
However, if the Signal returns to an acceptable level, the Transmitter will
automatically switch ON again.
*Need some help? Call 02 4574 8888 or go to www.oricom.com.au
12