Table of Contents
Advertisement
Installation
(D5) A ccessories (6.3mm and SCART Adaptor) in above drawing are
NOT PROVIdEd in the pack components.
(D6) I f your Audio Source does not have an optical socket, then use
one of the following Adapters that connects to the Audio In of the
Transmitter.
• 3.5mm to 6.3mm Adapter Plug (Not included)
• SCART Adapter (Not included)
(D7) W hen connected to the mains power, the green Power Indicator
LED will glow immediately.
When the audio signal is detected from the Audio Source, the Green LED
Power Indicator will glow constantly.
Note: When using Optical Cable connection, please set your audio
devices/systems to PCM Two-Channel (support 32KHZ—196KHZ).
For details, please refer to the operation manual of your audio
devices/systems for the proper setting.
Headset receiver
Make sure the built-in Battery inside the
Headset Receiver is fully charged for the
first use.
*Need some help? Call 02 4574 8888 or go to www.oricom.com.au
10
Advertisement
Table of Contents
