Bosch PEX 400 A Operating Instructions Manual page 8

Product Specifications
Eccentric Sander
Order number
Rated input power
Power output
No-load speed
No-load oscillations rate
Speed selection
Eccentricity
Sanding plate dia.
Weight (without accessories) approx.
Protection class
Please observe the order number of your machine. The trade names of the individual machines may vary.
Product Elements
1 L-type Allen key
2 Speed selector thumbwheel (PEX 400 AE)
3 Dust box (micro-filtersystem)
4 Locking button for On-Off switch
5 On-Off switch
6 Screw
7 Sanding sheet*
8 Sanding plate
9 Auxiliary Handle
10 Winged screw for auxiliary handle adjustment
11 Holder
12 Plastic slide
13 Outlet piece
14 Latching lever
15 Filter element (micro-filtersystem)
16 Extraction adapter*
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
Noise/Vibration Information
Measured values determined according to EN 50 144.
The A-weighted sound pressure level of the product is
typically 84 dB(A). The noise level when working can
exceed 85 dB(A).
Wear ear protection!
The typical weighted acceleration is 5.5 m/s
2 609 932 202 • (02.08) T
PEX 400 A
0 603 310 0..
[W] 400
[W] 215
[RPM] 13000
[RPM] 26000
–
[mm] 5.0
[mm] 125
[kg] 1.9
/ II
Intended Use
The machine is intended for dry sanding of wood,
plastic, metal and filler material as well as painted sur-
faces.
Machines with electronic control are also suitable for
polishing.
In addition, the general safety notes in the en-
closed booklet must be observed.
Before using for the first time, ask for a practical
demonstration.
If the cable is damaged or cut through while work-
I
ing, do not touch the cable but immediately pull the
mains plug. Never use the machine with a dam-
aged cable.
Connect machines that are used outdoors by
I
means of a fault current protection switch (FI) with
a maximum triggering current of 30 mA. Use only
an extension cable that is approved for outdoor
use.
Wear safety glasses.
I
Safety gloves are recommended.
I
Always direct the cable to the rear away from the
I
machine.
Insert the mains plug into the socket only when the
I
machine is switched off.
The machine can be used only for dry sanding.
I
Working with material containing asbestos is not
I
2
. permitted.
English–1
PEX 400 AE
0 603 310 6..
400
215
4500–13000
9000–26000
G
5.0
125
1.9
/ II
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.