Rockler Complete Router Table Assembly Instructions Manual

Rockler Complete Router Table Assembly Instructions Manual

Advertisement

Complete Router Table Package Assembly Instructions
Effective July 2019
Review full manual instructions prior to use for important safety information.
Always check Rockler.com to confirm that you are using the most recent manual version for your product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Complete Router Table and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rockler Complete Router Table

  • Page 1 Complete Router Table Package Assembly Instructions Effective July 2019 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent manual version for your product.
  • Page 2: General Safety Warnings

    Instructions and safety warnings for your product (see the • Keep children and bystanders away from the tool Instructions link on the product page at Rockler.com). operating area; • Do NOT use power tools in explosive environments, or in >...
  • Page 3: Assembling The Fence

    Assembling the Fence 1. Insert 5/16"-18 x 1 ⁄ " T-Bolts (5) through the holes in the face 4. Position the Bit Safety Guard (3) on the T-Bolts and secure of the Aluminum Fence Bracket (1) and thread a 1" Round with 1"...
  • Page 5 PARTS LIST Quantity Quantity 17 Bottom Outer Leg Bracket ⁄ " x 23 ⁄ " x 1" Tabletop 18 Angled Leg Bracket Connector ⁄ " x 11 ⁄ " Phenolic Plate 10 Plate Insert 19 1 ⁄ " long 5/16"-18 TPI Hex Cap Bolt 11 Starter Pin 20 Small Washer 12 Plate Leveling Screw...
  • Page 6 Assembling the Leg Brackets Connecting the Leg Brackets 1. Insert the Bottom Inner Leg Bracket (16) into the Top Inner 1. Position the Inner Leg Bracket and Outer Leg Bracket Leg Bracket (14) and align the predrilled holes. assemblies so that their center axis holes align. Make sure that the tops of the assemblies are oriented properly for 2.
  • Page 7: Attaching The Tabletop

    2. Turn the stand upside down and center it on the table Check Rockler.com for updates to these instructions. If you have side-to-side, with the outside edge of the rear mounting further questions, please contact our Technical Support Department flange 1/2"...
  • Page 8 59133 Distributed by Rockler Companies, Inc. 1-800-279-4441 Rev 07/19 4365 Willow Dr. Medina, MN 55340 www.rockler.com...

Table of Contents