SSI Fluid-Trac DFT-110 Product Overview

DFT-110 Product Overview
Product Overview
Digital Fluid-Trac Model DFT-110 multi unit drum level gauge is a cost competitive non-contact liquid
®
level drum gauge. The DFT-110 drum gauge was designed for usage on ANSI MH2-2004 vertical drums
(≤ 32 inch depths). The DFT-110 drum gauge allows the user to easily select between the following
vertical drum settings: 15 gallon, 30 gallon, 55 gallon, 57 liter, 114 liter, and 208 liter.

Product Features

• Display Resolution: ± 0.5 gallon or ± 1 liter *
• Accuracy: ± 2.5% (1.5 gallons or 6 liters) of full scale volume (55 gallons / 208 liters setting) *
• Automatic Shutoff Prolonging Battery Life
• NEMA 4 Packaging
• Static Display Useful for Usage Consumption Calculations: The static level reading can be used
for manual rate calculations – i.e. daily or weekly consumption.
• Low Level Warning Light: A red LED will flash once every second when the volume is at 10% or
below the maximum volume.
• Easy to install: Digital Fluid-Trac
• Standard: Fits 2" NPT or ¾" NPS opening
• Deadband: 6" from top of barrel when using the optional ¾" adaptor
• More Reliable: No components to chemically corrode inside liquid media.
• Chemical compatibility: Digital Fluid-Trac
such as water, waste water, motor oil, hydraulic fluid and diesel fuel.
Note: The Digital Fluid-Trac™ is NOT intended for use with gasoline or other volatile liquids that produce
a vapor pressure under normal operating temperature (0 °C - 50 °C).
* Outside of stated dead band.
Copyright © 2019, SSI Technologies, LLC
DFT-110 has no components to protrude into the drum.
®
DFT-110 drum gauge works with a wide variety of media
®
1
Product Overview
Doc. DT-AN5 — Rev. 01 ssi-sensors.com