Axis 241Q User Manual page 68

Axis video server - Technical specifications
68
Item
Alarm and event
management
Connectors
Casing
Processors and memory
Power
Operating conditions
Installation, management
and maintenance
Video access from Web
browser
Minimum Web browsing
requirements
Specification
• Events triggered by built-in motion detection, external inputs or according to
aschedule,
• Image upload over FTP, Email, and HTTP,
• Notification over TCP, Email, HTTP and external outputs
• Pre- and post alarm buffer of 9 MB per channel (approx. 4 min of CIF resolution
video at 4 frames per second)
• Analog composite video,
• NTSC/PAL autosensing inputs:
• AXIS 241Q/QA: 4 BNC inputs
• AXIS 241S/SA, AXIS 243SA: 1 BNC input and 1 BNC output: loop through or Y/C
video input
• Ethernet 10BaseT/100BaseTX, RJ-45
• Terminal block:
4 alarm inputs,
4 alarm outputs,
RS-485/422 half duplex port,
Alternative power connection
• D-Sub for RS-232 port
• AXIS 241QA/SA, AXIS 243SA: 3.5 mm jack for Mic in (max 54 mVpp) or Line in (max
8.0 Vpp, mono),
• 3.5 mm jack for Line out (max 2.6 Vpp, mono) to active speaker
• Metal casing. Standalone, stackable or with brackets forwall or cage mount
• CPU: ETRAX 100LX 32bit
• Video processing and compression: ARTPEC-2
• RAM: 64MB (241Q/QA), 32 MB (241S/SA, 243SA)
• Flash: 8 MB
• Battery backed up by real-time clock
• 7 - 20 V DC, max 8 W
• 5 - 50 ºC (41 - 122 ºF)
• Humidity 20 - 80% RH (non-condensing)
• Installation tool on CD and web-based configuration
• Configuration backup and restore
• Firmware upgrades over HTTP or FTP, firmware available at www.axis.com
• Camera live view
• Sequence tour capability for up to 20 PTZ presets or other Axis video sources
• Customizable HTML pages
• Pentium III CPU 500 MHz or higher, or equivalent AMD128 MB RAM AGP graphic
card, Direct Draw, 32 MB RAM
• Windows XP, 2000, Server 2003, NT4.0*, ME* or 98*, DirectX 9.0 or later Internet
Explorer 5.x or later
• For other operating systems and browsers see www.axis.com/techsup
*Motion JPEG only