Energizer EZ40VTDE40N User Manual page 13

For effective mulching, do not cut wet grass because it tends to stick to the underside of
-
the deck, preventing proper mulching of grass clippings. New or thick grass may require a
narrower cut. The ground speed should be adjusted to the condition of the lawn. If mowing
has been delayed and the grass has been allowed to grow longer than 4 in. (10 cm), mow
the lawn twice in order to reduce the grass height to a maximum of 3-3/8 in. (8.5 cm).
Walk at a steady pace. Overlap the cutting rows. Do not let the grass get too tall. If the
-
grass gets too long, start at the highest cutting position and work down to the desired cutting
height.
WARNING
If you strike a foreign object, stop the motor and remove the battery. Thoroughly
inspect the mower for any damage. Repair any damage before operating the
mower. Excessive vibration of the mower during operation is an indication of
damage. Thoroughly inspect the mower and repair any damage before operating
the mower.
e. Emptying the grass catcher bag
Stop the mower and allow blades to completely stop.
Lift the rear discharge cover.
-
Lift the grass catcher by its handle to remove from
-
mower.
Empty the grass catcher.
-
Lift the rear discharge cover and reinstall the grass
-
catcher as described earlier in this manual.
NOTE: When the grass catcher bag full, the grass
catcher bag needs to be emptied.
Battery and charger
f.
To charge the battery:
Remove the battery from the tool
-
Plug the charger to a power socket. Then plug the charger to the battery.
-