DoCash Cube User Manual page 19

6.5 Select accumulative counting
When you need an accumulative counting, press "ADD" key on
the control panel and then "+" will display on the LCD. The
machine will count on the basic of the original number displayed
on the LCD.
After the banknote counting is finished, the number displayed on
the LCD is the summation of the several times' counting. When the
accumulative pieces reach 999+1 or accumulative value reaches
999999+1, it will be resumed to 0.
6.6 Batch mode
When you need a batch counting, press "BAT" key, when "100"
is displayed on the preset window, it shows the batch function has
been turned on, the batch number is 100. Each time when you press
"BAT" key, 100, 50, 20, 10 and "---" will be displayed in turn
repeatedly. If the LCD displays "---", the batch function is disabled.
You also can press or hold "+1/+10" key to increase the batch
number by 1 or 10 according to desire. The batch number can be
selected in the range of 1~200. After setting the batch number, Put
the banknotes on the hopper and the machine will count
automatically, while reach the batch number, the machine will stop
automatically.
DoCash Cube
19
www.docash.de