Jump-Starting - BMW R 1200 R 2008 Rider's Manual

Replace defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
OE
Install bulb 2 by turning clock-
wise in light housing.
OE
Insert inside end of lens into
light housing and close.
Install screw 1.

Jump-starting

The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
motorcycle electronics.
Do not use the onboard socket
to jump-start the engine of the
motorcycle.
Touching live parts of the
ignition system with the
8
117
z