BMW R 1200 R 2008 Rider's Manual page 106

8
104
Mount spacing bushing 6 on
left side in wheel hub.
The front wheel must be
installed right way round to
z
rotate in the correct direction.
Observe the direction of rota-
tion arrows on the tires or on the
rim.
Roll front wheel into front
wheel guide.
with BMW Motorrad Integral
OE
ABS
When rolling in wheel, watch
ABS sensor on left side.
Lift front wheel and install
quick-release axle 5 with
appropriate torque.
Quick-release axle in axle
mount
37 lb/ft (50 Nm)
Tighten axle clamping screw 4
with appropriate torque.
Clamping screw of quick-
release axle
14 lb/ft (19 Nm)
Remove front wheel stand.
OA
without center stand
Remove auxiliary stand.
Ease brake calipers onto brake
disks.
Install securing screws 1 on left
and right with specified torque.
Brake caliper on slider
tube
22 lb/ft (30 Nm)
Remove adhesive tape from
wheel rim.