Setting The Password - Axis 216FD Installation Manual

AXIS 216FD Installation Guide

Setting the Password

1. When accessing the AXIS 216FD for the first
time, the 'Configure Root Password' dialog will
be displayed.
2. Enter a password and then re-enter it, to confirm
the spelling. Click OK.
3. Enter the user name root in the 'Enter Network
Password' dialog.
Note: The default administrator user name root cannot be deleted.
4. Enter the password as set in step 2 above, and click OK. If the password is lost, the AXIS
216FD must be reset to the factory default settings. See page 15.
5. If required, click Yes to install AMC (AXIS Media Control), to allow viewing of the video
stream in your browser. You will need administrator rights on the computer to do this.
6. The Live View page of the AXIS 216FD is displayed, with links to the Setup tools, which
allow you to customize the camera.
7. Proceed to "Adjusting the image" on page 14, to set the focus and zoom and to complete
the hardware installation.
Page 13
Help - Displays online help
on all aspects of using the
camera.
Setup - Provides all the
necessary tools for config-
uring the camera to suit
your requirements.