Product Information - ASA Electronics AP-2 Product Introductions

Product Information

■Feature
-Wide measuring range, high accuracy and the models are complete.
-Attached the measuring joint (either one) can be run clockwise or counter-clockwise to measure the o/p
torque with usual bit and the measured value will be cleared in setting time automatically.
-There are two measuring units: kgf-cm/ N.m and three measuring models: PEAK/TRACK/F.PEAK for
choosing to operate easily.
-It can be calculated and displayed the maximum and average torque value.
-Built-in an o/p terminal which it can be connected to the computer for recalling, editing and calculating
and measured datum.
-The meter is attached rechargeable batteries, small volume and light weight, it is convenient to use.
Model
Standard
(Kgf-cm)
measuring
(N.m)
range
Accuracy
Display
Measuring direction
Measuring PEAK
TRACK
mode
F.PEAK
Power source
Charging time
Working Time
AC adaptor
Socket Size
Dimension (mm)
Weight (kg)
Caution
AP-2 AP-10
0.03~2.00 0.15~10.00
0.003~0.200 0.015~1.000
Lock display when the torque reaches peak value
Display changed along with the current torque value
Lock display when the torque reaches first peak value
Ni-MH chargeable battery/ charge life up to 300 times up
Input: AC100~240V、60/50Hz
1. No applicable for measuring semi-auto shut-off type of electric and pneumatic tools.
2.
The max measuring range cannot be over the standard measuring range.
AP-50
0.75~50.0
0.075~5.00
In ±0.5% (199 digi or less ±1 digi)
LCD digital display
Clockwise, counterclockwise directions
6 hours
8 hours
20mm
230 (L)x 120 (W)x 60 (H) mm
2.0kg
8
AP-100
1.5~100.0
0.15~10.00
Output: DC7.3~8V、0.5A
AP-300
4.5~300.0
0.45~30.00