Ptz Configuration; Preset Position Setup - Axis 209MFD User Manual

AXIS 209MFD/MFD-R/MFD-R M12
22

PTZ Configuration

Digital Pan/Tilt/Zoom (PTZ) in the AXIS 209MFD/MFD-R/MFD-R M12 is not enabled by default. To use
digital PTZ, select Enable digital PTZ and click Save.
When digital PTZ is enabled, PTZ controls and the preset position setup fields appear. Max zoom can also
be adjusted, but note that any increase in digital zoom will decrease the maximum resolution that can be set
under Video & Image > Image > Image Appearance > Resolution. See Video & Image settings, on page 14

Preset Position Setup

A preset position is a pre-defined camera view that can quickly and easily be viewed.
From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera to the required
position. When satisfied with the camera's position, enter a descriptive name. This camera position is then
saved as a preset position.
The AXIS 209MFD/MFD-R/MFD-R M12 will take the specified position when the preset's name is selected
from the Available positions drop-down list. Preset positions can be selected in the Live View, Guard Tour,
and Event Types windows.
One position can be set as the Home position, which is readily accessible by clicking on the Home button in
both the Preset Position Setup window and the Live View window. The position's name will have (H)
added, e.g. Office Entrance (H).
You can return the network camera to the overview image after a set time of viewing a preset position. The
interval is configurable from 0 seconds (disabled) to 300 seconds. The default interval is 30 seconds.