Table of Contents
Advertisement
SECTION 8 –
FURNITURE AND SOFTGOODS
4. Pull down on Pop-Top handle to create slack
to release latch.Follow these steps to release
the driver's side and the passenger's side.
5. Press up firmly on the handles and lift Pop-
Top up until shocks take over and extend Pop-
Top to the extended position shown below.
6. Locate the ladder stored in the cab overhead.
The 2 halves of the ladder are assembled using
the latch system. Connect the 2 ends together
making sure that the latches are in the open
position.
8-2
7. Attach the 2 latches and lock them down to
lock the 2 halves of the ladder in place.
8. Attach the ladder to the Driver's side ladder
clamps provided to hold the ladder in place.
9. Reverse the steps to collapse Pop-Top into the
travel position. Use the straps attached to the
handles to assist pulling down the Pop-Top.
10. The red tabs located on the sides are designed
to pull the material inward, to ensure that the
pop-top does not close down and pinch the
sides of the sleep system.
Advertisement
Table of Contents
