Section 3 - Installation; Necessary Tools; Cylinder Installation - Uflex UC 69-I Installation And Maintenance Manual

3 INSTALLATION

3.1 Necessary tools

Open end Open end
wrench wrench
13 mm
10 mm

3.2 Cylinder installation

DANGER
An arm shorter than the one indicated could move the helm instead of the cylinder up to the end stroke by
causing the breaking of the steering guide and the following loss of boat control.
WARNING
A longer arm reduces the steering angle.
NOTICE
If the arm is not already mounted, see the mounting instructions of the arm manufacturer.
NOTICE
To choose the arm according to the type of application used see paragraph 1.6.
1 Check if the arm (1) and the helm blade (2) are aligned, then center
them to the longitudinal axis "y".
2 Start assembling by following the instructions in chapters
h1.4 and 1.5.
If necessary screw and unscrew the swivel head according to the
instructions given in table on the next page.
Open end
Open end
wrench
wrench
17 mm 22 mm
HYDRAULIC CYLINDERS FOR INBOARD ENGINES
Installation and Maintenance Manual
Open end
Open end
wrench
wrench
3/4"
15/16"
1
2
Torque
wrench
l
l
y
page 11
- of 23