Service And Maintenance; Controllable Functions - LGB Santa Fe Diesellok F7A Manual

SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Oil (7149).
Replacing Traction Tires
- Loosen two screws on the side frame of the truck and remove the side frames.
- Remove the old traction tire with a small flat screwdriver:
Lift the old traction tire out of the groove in the driving wheel.
- Carefully push the new traction tire over the wheel and into the groove on the wheel.
- Check to make sure that the traction tire is properly seated.
- Put the model back together.
Cleaning
Clean the locomotive only with a soft cloth. Do not use any cleaning agents or abra-
sive cleaners.
General Note to Avoid Electromagnetic Interference:
A permanent, flawless wheel-rail contact is required in order to guarantee operation
for which a model is designed. Do not make any changes to current-conducting parts.

Controllable Functions

1
Lighting
Sound effect: Long Horn
Sound effect: Squealing brakes off
Sound effect: Short Horn
Sound: Greeting announcement
Sound effect: Compressor
Sound effect: Operating sounds
Sound effect: Bell
Sound on/off
ABV, off
Sound effect: Horn sequence before a grade crossing
Third headlight
Marslight
Long distance headlights
Sound effect: Sanding
Engineer's cab lighting
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Station announcements
Sound effect: Announcement
Sound effect: 4 x Short Horn
Sound effect: Letting off air
Sound effect: Rail joints
Sound effect: Coupling together
1 active in analog operation
2
with random sounds
10
1, 2
LV + LR
1 Sound 1
2 BS
3 Sound 2
4 Sound 7 / 8
5 Sound 11
6 FS
7 Sound 3
8
9
10 Sound 15
11
12 AUX 1
13 AUX 6
14 Sound 17
15 AUX 2
16 Sound 5
17 Sound 6
18 Sound 20
19 Sound 4
20 Sound 16
21 Sound 14
22 Sound 19
23 Sound 18