Autopilot Pool Pilot PROA Series Owner's Manual page 25

Visually inspect the power supply once every month.
Open the enclosure and visually check for any abnormal conditions such as burned wires,
loose connections, or corrosion.
Operate the system to verify performance once every month.
1. Turn the system on.
2. Adjust the control knob to the full off position and note that the amps displayed on the
meter go to zero.
3. Adjust the control knob to the maximum position and verify that amps go to maximum.
4. Adjust the control knob to the desired setting.
PROA / PROB Manual Page 25 of 28 9/24/19