• RISK OF ELECTRICAL SHOCK - Modifying the AutoPilot
any way may cause bodily injury and will void the warranty.
• RISK OF ELECTRICAL SHOCK - Only replace components with those specified
by the manufacturer.
• RISK OF ELECTRICAL SHOCK - When installing the system, ensure that power
is linked to the main pump power source for the pool to ensure that the
AutoPilot
• RISK OF ELECTRICAL SHOCK - All boxes on the AutoPilot
contain high voltage components. Never open any box while the power is on.
• RISK OF ELECTRICAL SHOCK – DANGER
o Replace damaged cord immediately
o Do not bury cord
• PERSONAL SAFETY HAZARD – The system has the potential to release high
doses of chorine. Use caution when handling, servicing, or operating the
equipment. Do not energize or operate the system if the cell housing is damaged
or improperly assembled.
• PERSONAL SAFETY HAZARD – Do not allow children to operate the AutoPilot
PRO WC system.
• CHEMICAL HAZARD - Always follow the instructions on the manufacturer's label
whenever handling or using chemicals.
•
Cord Connected at time of manufacture
2.4 PLAN AHEAD
Almost every pump room encountered is different. It is imperative to have prior knowledge of
the facility in which the unit is to be installed and to evaluate what type of tools, wall anchors,
etc. will be needed to make the installation as problem free as possible.
2.5 ADDITIONAL PARTS REQUIRED FOR INSTALLATION
• Polypropylene tubing, both 1/2 and 3/8 inch
• 1 or 1-1/2 inch PVC tubing or pipe
• PVC fittings as needed
• Anchors and mounting hardware
PROA / PROB Manual
®
PRO WC system never operates when the pumps are off.
.
Page 11 of 28
®
PRO WC system in
®
PRO WC system
9/24/19
®
Need help?
Do you have a question about the Pool Pilot PROA Series and is the answer not in the manual?