AVERATEC N3440TH1E-1 User Manual page 76

Note
Some system may not have the PC Card Slot option.
• Make sure you have properly installed the driver for the card.
• Consult the card's manual or contact the vendor for troubleshooting.
• Make sure the card is fully inserted; the outer end of the card should be even with the edge of the computer.
• Remove and insert the PC card again.
• Make sure there is no IRQ conflict with the card. See Windows on-line help for solving IRQ conflicts.
• Reboot the computer and see if the problem persists.
• The card may be defective. Try the card on another system, if possible.
• Make sure you have <Stop> the PC card before removing it. Double-click the Safely Remove Hardware icon at the lower
right corner of the task bar and select the card you wish to stop.
When you click <Close>, in few seconds Windows will prompt you to remove the card.
Chapter 8 Troubleshooting 62