Electrolux EXO27HEIWE User Manual page 19

Dehumidifying Operation
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
TEMP
B
ON/OFF
MODE
A
SWING
ECONOMY
ION
RESET LOCK
FOLLOW
ME
DISPLAY
Cooling/Heating/Fan Operation
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
TEMP
B
ON/OFF
MODE
A
SWING
ECONOMY
ION
RESET LOCK
FOLLOW
ME
DISPLAY
FAN
HIGH
MED
LOW
C
FAN SPEED
TIMER ON
TIMER OFF
LED
TURBO
FAN
HIGH
MED
LOW
D
FAN SPEED
C
TIMER ON
TIMER OFF
LED
TURBO
1. Press the MODE button (A) to select
DRY mode.
2. Press the TEMP button (B) to
set the desired temperature. The
temperature can be set within a range
of 17ºC/62ºF~30ºC/88ºF in 1ºC/2ºF
increments.
3. Press the ON/OFF button (C) to start
the air conditioner.
In the Dehumidifying mode, you
can not switch the fan speed. It
has already been automatically
controlled.
1. Press the MODE button (A) to select
COOL, HEAT (Reverse cycle models
only) or FAN mode.
2. Press the TEMP button (B) to
set the desired temperature. The
temperature can be set within a range
of 17ºC/62ºF~30ºC/88ºF in 1ºC/2ºF
increments.
3. Press the FAN SPEED button (C) to
select the fan speed in four steps -
Auto, Low, Med, or High.
4. Press the ON/OFF button (D) to start
the air conditioner.
In the Fan mode, the setting
temperature is not displayed in
the remote controller and you
are not able to control the room
temperature either. In this case,
only step 1, 3 and 4 may be
performed.
ENGLISH 19