Table of Contents
Advertisement
Resetting the Clock for
Daylight Saving Time
Changing Your
Recorded Announcements
T
adjust the SPIRIT Attendant's clock by one hour (for daylight saving time),
O
use the following instructions.
1. Select an outside line and dial a telephone number that is answered by your
SPIRIT Attendant.
2. Wait for an answer.
3. Dial
followed immediately by your authorized caller code and #.
The two-beep confirmation tone sounds.
4. Dial
72.
5. Perform the appropriate procedure:
— Dial 1 to add one hour to the current time (normally used in the spring to
begin daylight saving time).
— Dial 2 to subtract one hour from the current time (normally used in the
fall to cancel daylight saving time).
The two-beep confirmation tone sounds.
6. Continue programming or exit authorized caller mode by dialing
NOTE:
If you have more than one SPIRIT Attendant, you must follow
the procedures in this section to program every
SPIRIT Attendant identically. Number of rings to answer must
not be identical for all SPIRIT Attendants.
7. To disconnect, dial #.
Three types of recorded announcements are available with the SPIRIT Attendant:
Day, Night, and Hold.
The total duration for all recorded announcements for the SPIRIT Attendant must
64 seconds. Each recorded announcement has a maximum duration in
equal
seconds as follows:
TABLE 2-2 Time Allocations for Recorded Announcements.
Duration
Announcement
(Seconds)
Day
25
Night
25
Hold
14
Total
64
#.
Changing the Current Settings
2-7
Advertisement
Table of Contents
